Keyboard shortcuts

Press ← or → to navigate between chapters

Press S or / to search in the book

Press ? to show this help

Press Esc to hide this help

Defocus size

Besides the regular Size parameter there is also Max Size, and Size Multiplier which scales both. Understanding and using them properly can help get better results.

Note

This is only important for Depth mode. In 2D mode the defocus is Size times Size Multiplier.

With Use Camera on, Camera Max Size is used in place of Max Size.

Understanding Max Size

The regular Size parameter will set the size of the defocus in pixels when something is out of focus, in the far field.

Max Size controls two things simultaneously:

  1. The maximum sets the maximum defocus size across the entire image. This is a clamping value.
  2. The maximum defines the defocus size in the near field.

Example

If Size is set to 5, the defocus size in the far field will be 5. If Max Size is set to 5, it will also be 5 in the near field. Lowering this value would clamp the size for the entire image.

However, increasing Max Size, for example to 10, will result in a defocus size of 10 in the near field.

This is shown in this following video. First, Size and Max Size are set to the same value, resulting in the same defocus across the image. Then: Max Size is increased and shows that the near field also increases.

Limits

The effective radius is Max Size times Size Multiplier in Depth mode, and Size times Size Multiplier in 2D mode. Renders with an effective radius above 16384 px are rejected, and the error is written to the host’s log.